Construction

The construction industry has an important role to play in championing efficient and sustainable water use. Working together, the industry can take actions to impact water conservation and pollution.

We have partnered with industry leaders in sustainability, Sisk and Cairn Homes as well as the Irish Green Building Council and Construction Industry Federation. Together, we produced these essential tips for water use and planning in construction.

Planning

Prepare a water management plan for your project that includes:

• Actions during construction.
• Appliances and plumbing to be installed.
• Water reuse potential.
• Landscaping and rainwater utilisation.
• Include water conservation and water quality in all of your project tenders and contractual documents.
• Specify water efficient fittings and appliances. These should reduce drinking water use inside the home to under 80 litres per person per day. Use the Water Efficiency Calculator from European Unified Water label to calculate water use per person.
• Stay up to date with the latest design and appliances to help water conservation.
• Agree on a budget and procure funding. Check Enterprise Ireland programmes GreenPlus and Green Start for funding and grants.
• If you are designing a greenfield site, use natural draining swales instead of costly concrete pipes.
• Install drainage systems that allow the polluted 'first flush' to be diverted into trade waste. The clean water that follows it can flow into tanks, pond systems or drainage swales.

People

Make water conservation a key objective of the project. Make sure everyone involved is aware of their responsibilities.

• Provide induction training for new employees and contractors. This shouldmake them aware of the program benefits and their responsibilities.
• Keep the water management plan on site and accessible.
• Discuss water management at regular meetings.
• Keep track of ongoing achievements.
• Promote your achievements to local media and industry associations.

On-site

• Meter your water usage on site
• Use the water consumption hierarchy - prevent, conserve, reuse or recycle, potable water

Prevention

• Use waterless systems like wheel washes and urinals.
• Use brooms rather than hoses to clean paths and gutters.
• Use offsite construction, such as precast or modular, to reduce on site batching.

Potable (drinking) water

Only use potable water as a last resort. If you must use it, then conserve, reuse or recycle.​

• Maintain and fix systems to prevent leaks and drips
• Don't leave taps running unnecessarily
• Reduce evaporation by retaining as much vegetation as possible
• Install water efficient irrigation systems

If water use is necessary:

• Use high pressure, water-efficient trigger hoses for cleaning.
• Use buckets of water to clean tools instead of running water.
• Monitor high water use areas on site directly, such as wheelwash and dust suppression.
• Use admixture in grey water for dust suppression.

Protect water quality

Avoid disturbing waterways, flood plains, vegetation and soil by planning ahead.

Draw up your drainage plan before works start. It's important that nothing from your site, such as soil, sand and cement slurry, enters gutters or drains. Doing this will help avoid polluting the stormwater system, local streams and rivers. Here are some tips to do this.

• Sustainable Urban Drainage systems (SUDS) should be specified in new developments. These minimise the volume and rate of water run-off from the site that could impact flooding elsewhere.
• Don't put cement works on roads or paths to avoid the need to wash slurry away with water.
• Fence the site with temporary hoarding and line it with hay bales. Geotextile silt fencing can also be used.
• Install and maintain erosion and sediment control devices. Bales, contours, baffles, mounds or vegetation can reduce water velocities by redirecting runoff at regular intervals.
• Cover or filter stormwater inlets and drains.
• Monitor discharges to controlled waters regularly.
• Regularly clean and maintain all stormwater protection devices.
• Avoid the use of building materials such as asbestos or PVC, which will pollute water.
• Stockpile and cover building materials away from drains or roads.
• Restrict all materials and spill-risk activities to the least sensitive part of the site. That means the greatest distance from surface waters and drainage.

Unused liquid paints should never be poured down on-site drainage systems. These must be either:

• returned to the manufacturer
• sent to a reuse scheme such as Community RePaint
• disposed of in line with the Waste Management Procedure

Road and carpark design

• Use natural drainage swales instead of costly concrete drainage pipes on greenfield sites.
• Harvest rainwater from car parks by avoiding the use of kerbing. Allow direct runoff into recharge zones. Recharge zones may be grassed or planted swales, permanent ponding basins or graded rock terracing.
• Design ground surfaces and paved areas to slope away from buildings and structures. This will enable water to run onto surrounding garden areas and recharge zones.